Back to the main page Back to category Modern
watch details
Rare 23-Jewel Marked 60-Hour Illinois Sangamo Special Railroad Pocket Watch
Estimated price for orientation: 4 550 $
Category: Modern
Class:
Description Year of Manufacture: 1920-1929 Escapement Type: Lever Brand: Illinois Case Color: Green MPN: Does Not Apply Display: Analog Material: Green Gold Filled Serial Number: 4,760,437 Closure: Open Face Model: Sangamo Special Features: Railroad Grade, 60 Hour Country/Region of Manufacture: United States Movement: Mechanical (Hand-winding)
Super Rare 23-Jewel Marked 60-Hour Illinois Sangamo Special in Green-Gold Sangamo Case
Illinois; U.S./Ill.; Man’s; SN#4,760,437; CA1925
CASE: The green gold-filled 16-size (45-49MM) No. 8,177,962 open face case is plain and signed “Sangamo Special Wadsworth.”
DIAL: This white porcelain double sunk dial displays Arabic numerals, spade hands and is signed “Illinois.”
MOVT: The 23-jewel lever-set No. 4,760,437 nickel has a lever escapement, 6 positions, bridge style layout and is signed “60-Hour.”
C 2-1/2 (Case is in Perfect Condition – almost as new)
D 3-43 (Dial is in Very Good Condition – hairline)
M 2 (Movement is in Perfect Condition)
R 9-1/2 (Rarity Grade on a scale of #1 being very common to #10 being extremely rare)
Expert’s Opinion: We have owned and offered only a few signed 60-hour 23-jewel Sangamo’s. This is a beauty! AI-AM62016-20 Stem-wind, Lever-Set Movements
Mandatory for all railroad watches after roughly 1908, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (most hunter cases have levers accessible without removing the crystal or bezel), which was generally found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. Bridge Style Layout
The metal bar which bears the pivot of wheel and is supported at both ends. The bridge style watch has two or three fingers to hold the wheels in place and together are called a bridge. The term bridge (horologically) is one that is anchored at both ends. Adjustment
Watch adjustment is the process of correcting those errors in the watch that cause variation in time keeping. These include temperature influences, variation in driving power and position of the watch with respect to mechanism such as pendant up or dial up. Watches with better calibre movements will have been adjusted at the factory for a number of positions. The usual array of positions include a subset of the following positions:
1. Dial up 2. Dial down 3. Bow up 4. Bow down (Not required by Railroad) 5. Bow left 6. Bow right These positional adjustments are intended to insure that the watch is just as realiable and accurate regardless of the position in which it is stored or used. In addition to positional adjustments, the watch may also be adjusted for Temperature(heat/cold). Temperature affects different elements in different ways. Heat will cause some metals to expand faster than others, and cold may cause some meta
Description
| Year of Manufacture: | 1920-1929 | Escapement Type: | Lever |
| Brand: | Illinois | Case Color: | Green |
| MPN: | Does Not Apply | Display: | Analog |
| Material: | Green Gold Filled | Serial Number: | 4,760,437 |
| Closure: | Open Face | Model: | Sangamo Special |
| Features: | Railroad Grade, 60 Hour | Country/Region of Manufacture: | United States |
| Movement: | Mechanical (Hand-winding) |
Illinois; U.S./Ill.; Man’s; SN#4,760,437; CA1925
CASE: The green gold-filled 16-size (45-49MM) No. 8,177,962 open face case is plain and signed “Sangamo Special Wadsworth.”
DIAL: This white porcelain double sunk dial displays Arabic numerals, spade hands and is signed “Illinois.”
MOVT: The 23-jewel lever-set No. 4,760,437 nickel has a lever escapement, 6 positions, bridge style layout and is signed “60-Hour.”
C 2-1/2 (Case is in Perfect Condition – almost as new)
D 3-43 (Dial is in Very Good Condition – hairline)
M 2 (Movement is in Perfect Condition)
R 9-1/2 (Rarity Grade on a scale of #1 being very common to #10 being extremely rare)
Expert’s Opinion: We have owned and offered only a few signed 60-hour 23-jewel Sangamo’s. This is a beauty! AI-AM62016-20 Stem-wind, Lever-Set Movements
Mandatory for all railroad watches after roughly 1908, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (most hunter cases have levers accessible without removing the crystal or bezel), which was generally found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. Bridge Style Layout
The metal bar which bears the pivot of wheel and is supported at both ends. The bridge style watch has two or three fingers to hold the wheels in place and together are called a bridge. The term bridge (horologically) is one that is anchored at both ends. Adjustment
Watch adjustment is the process of correcting those errors in the watch that cause variation in time keeping. These include temperature influences, variation in driving power and position of the watch with respect to mechanism such as pendant up or dial up. Watches with better calibre movements will have been adjusted at the factory for a number of positions. The usual array of positions include a subset of the following positions:
1. Dial up 2. Dial down 3. Bow up 4. Bow down (Not required by Railroad) 5. Bow left 6. Bow right These positional adjustments are intended to insure that the watch is just as realiable and accurate regardless of the position in which it is stored or used. In addition to positional adjustments, the watch may also be adjusted for Temperature(heat/cold). Temperature affects different elements in different ways. Heat will cause some metals to expand faster than others, and cold may cause some meta