Back to the main page Back to category Antique
watch details
Quarter Hour Pump Repeater 18K Rose Gold F. Winkhaus of Germany Pocket Watch
Estimated price for orientation: 3 100 $
Category: Antique
Class:
Description Closure: Open Face Escapement Type: Verge Features: Includes Key, Quarter Hour Pump Repeater, Arabic Numerals Country/Region of Manufacture: Germany Movement: Mechanical (Key-winding) Pocket Watch Size: 18 Year of Manufacture: 1800-1809 Material: Solid Gold
18K 18-Size Quarter Hour Pump Repeater by F. Winkhaus of Germany Pocket Watch
Germany; Fredrick Winkhaus; Man’s; Circa: 1805
CASE: The 18K rose gold 18-size 53mm case features an open face and barleycorn/geometric decorations.
DIAL: This white porcelain dial displays Arabic numerals and Breguet hands.
MOVT: This key-set movement with verge/fusee escapement is gilt, with a full plate layout.
C 3 (The case is in very good condition.)
D 3-54-59 (The dial is in very good condition-chipped, winding aperture-restorations.)
M 3 (The movement is in very good condition.)
R 8 (Rarity on a scale of #1 being very common to #10 being extremely rare.)
Experts Opinion: A large 18K rose gold quarter hour pump repeater, verge fusee man’s watch of very fine quality. Comes with keys. AI-171-26Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original.Verge Fusee Escapement
Used in antique spring-powered mechanical watches and clocks, a fusee is a cone-shaped pulley with a helical groove around it, wound with a cord or chain which is attached to the mainspring barrel. Fusees were used from the 15th century to the early 20th century to improve timekeeping by equalizing the uneven pull of the mainspring as it ran down. The mainspring is coiled around a stationary axle (arbor), inside a cylindrical box, the barrel. The force of the spring turns the barrel.
Pump Quarter Hour Repeater
The repeater is set in motion by depressing the pump in the stem of the pocket watch, when the safety slide is switched off. The quarter repeater strikes the number of hours, and then the number of quarter hours since the last hour. The mechanism uses 2 chimes of different tones. The low tone usually signals the hours, and the high tone the quarter hours. As an example, if the time is 2:45, the quarter repeater sounds 2 low tones and after a short pause 3 high ones: "dong, dong, ding, ding, ding". Alternatively, some use a pair of tones to distinguish the quarter hours: "dong, dong, ding-dong, ding-dong, ding-dong".
Verge Fusee Escapement
Used in antique spring-powered mechanical watches and clocks, a fusee is a cone-shaped pulley with a helical groove around it, wound with a cord or chain which is attached to the mainspring barrel. Fusees were used from the 15th century to the early 20th century to improve timekeeping by equalizing the uneven pull of the mainspring as it ran down. The mainspring is coiled around a stationary axle (arbor), inside a cylindrical box, the barrel. The force of the spring turns the barrel.
Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original.
Full Plate Layout
A plate (or disc) that covers the works and supports the wheels pivots. There is a top plate, a bottom plate, half, and 3/4 plate. The top plate has the balance resting on it.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior. CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.
Description
| Closure: | Open Face | Escapement Type: | Verge |
| Features: | Includes Key, Quarter Hour Pump Repeater, Arabic Numerals | Country/Region of Manufacture: | Germany |
| Movement: | Mechanical (Key-winding) | Pocket Watch Size: | 18 |
| Year of Manufacture: | 1800-1809 | Material: | Solid Gold |
Germany; Fredrick Winkhaus; Man’s; Circa: 1805
CASE: The 18K rose gold 18-size 53mm case features an open face and barleycorn/geometric decorations.
DIAL: This white porcelain dial displays Arabic numerals and Breguet hands.
MOVT: This key-set movement with verge/fusee escapement is gilt, with a full plate layout.
C 3 (The case is in very good condition.)
D 3-54-59 (The dial is in very good condition-chipped, winding aperture-restorations.)
M 3 (The movement is in very good condition.)
R 8 (Rarity on a scale of #1 being very common to #10 being extremely rare.)
Experts Opinion: A large 18K rose gold quarter hour pump repeater, verge fusee man’s watch of very fine quality. Comes with keys. AI-171-26Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original.Verge Fusee Escapement
Used in antique spring-powered mechanical watches and clocks, a fusee is a cone-shaped pulley with a helical groove around it, wound with a cord or chain which is attached to the mainspring barrel. Fusees were used from the 15th century to the early 20th century to improve timekeeping by equalizing the uneven pull of the mainspring as it ran down. The mainspring is coiled around a stationary axle (arbor), inside a cylindrical box, the barrel. The force of the spring turns the barrel.
Pump Quarter Hour Repeater
The repeater is set in motion by depressing the pump in the stem of the pocket watch, when the safety slide is switched off. The quarter repeater strikes the number of hours, and then the number of quarter hours since the last hour. The mechanism uses 2 chimes of different tones. The low tone usually signals the hours, and the high tone the quarter hours. As an example, if the time is 2:45, the quarter repeater sounds 2 low tones and after a short pause 3 high ones: "dong, dong, ding, ding, ding". Alternatively, some use a pair of tones to distinguish the quarter hours: "dong, dong, ding-dong, ding-dong, ding-dong".
Verge Fusee Escapement
Used in antique spring-powered mechanical watches and clocks, a fusee is a cone-shaped pulley with a helical groove around it, wound with a cord or chain which is attached to the mainspring barrel. Fusees were used from the 15th century to the early 20th century to improve timekeeping by equalizing the uneven pull of the mainspring as it ran down. The mainspring is coiled around a stationary axle (arbor), inside a cylindrical box, the barrel. The force of the spring turns the barrel.
Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original.
Full Plate Layout
A plate (or disc) that covers the works and supports the wheels pivots. There is a top plate, a bottom plate, half, and 3/4 plate. The top plate has the balance resting on it.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior. CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.