Back to the main page Back to category Antique
watch details
WALTHAM BALL WATCH CO. POCKET WATCH 17 JEWEL 16 SIZE GOLD FILLED HUNTER CASE
Estimated price for orientation: 1 250 $
Category: Antique
Class:
Description Year of Manufacture: 1900-1909 Model: Ball Watch Co. Brand: Waltham Serial Number: B134,017 Material: Yellow Gold Filled Escapement Type: Lever Closure: Full Hunter Pocket Watch Size: 16 Features: 12-Hour Dial Number of Jewels: 17 Jewels Movement: Mechanical: Hand-winding Country/Region of Manufacture: United States
Scarce 17-Jewel Waltham Ball Watch Co. 16-Size Gold-Filled Hunter Case Railroad Pocket Watch
Ohio/U.S.A.; Ball Watch Co.; Man’s; Serial # B134,017; CA 1903
CASE: The yellow gold-filled 16-size (45-49MM) No. 4,731,668 case has floral decorations and is signed “Philadelphia Watch Case Co.”
DIAL: This white porcelain single sunk dial features Arabic numerals, spade hands and signed “Official Railroad Standard – Ball Watch Co.”
MOVT: The 17-jewel lever-set No. B134,017 gilt adjusted movement has a lever escapement, ¾-plate layout and is signed “Ball Official Standard.”
CONDITIONS:
C 3 (The case is in very good condition)
D 2 (The dial is in perfect condition)
M 3 (The movement is in very good condition)
R 9 (Rarity on a scale of #1 being very common to #10 being extremely rare)
Experts Opinion: Two stars in the book! A scarce 17-jewel hunter case, 16-size Official R. R. Standard nickel movement, mint porcelain official R. R. Standard Ball dial. Very few Ball hunter cases produced. AI-177-21te Jewel Count
Jewels are used as bearings to reduce metal-to-metal contacts which produce friction and wear. They improve the performance and accuracy of the watch and materially proglong its usefulness. The materials used for making watch jewels are diamonds, sapphires, rubies and garnets. The diamond is the hardest but is seldom used except for cap jewels. The sapphire is the next hardness and is the most commonly used because of its fine texture. Garnets are softer than than sapphires and rubies. Stem-wind, Lever-Set Movements
Mandatory for all railroad watches after roughly 1908, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (most hunter cases have levers accessible without removing the crystal or bezel), which was generally found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. 3/4 Plate Layout
The 3/4 plate and the balance cock are flush and about 1/4 of a full plate is cut out to allow for the balance, thus the 3/4 plate.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.
Description
| Year of Manufacture: | 1900-1909 | Model: | Ball Watch Co. |
| Brand: | Waltham | Serial Number: | B134,017 |
| Material: | Yellow Gold Filled | Escapement Type: | Lever |
| Closure: | Full Hunter | Pocket Watch Size: | 16 |
| Features: | 12-Hour Dial | Number of Jewels: | 17 Jewels |
| Movement: | Mechanical: Hand-winding | Country/Region of Manufacture: | United States |
Ohio/U.S.A.; Ball Watch Co.; Man’s; Serial # B134,017; CA 1903
CASE: The yellow gold-filled 16-size (45-49MM) No. 4,731,668 case has floral decorations and is signed “Philadelphia Watch Case Co.”
DIAL: This white porcelain single sunk dial features Arabic numerals, spade hands and signed “Official Railroad Standard – Ball Watch Co.”
MOVT: The 17-jewel lever-set No. B134,017 gilt adjusted movement has a lever escapement, ¾-plate layout and is signed “Ball Official Standard.”
CONDITIONS:
C 3 (The case is in very good condition)
D 2 (The dial is in perfect condition)
M 3 (The movement is in very good condition)
R 9 (Rarity on a scale of #1 being very common to #10 being extremely rare)
Experts Opinion: Two stars in the book! A scarce 17-jewel hunter case, 16-size Official R. R. Standard nickel movement, mint porcelain official R. R. Standard Ball dial. Very few Ball hunter cases produced. AI-177-21te Jewel Count
Jewels are used as bearings to reduce metal-to-metal contacts which produce friction and wear. They improve the performance and accuracy of the watch and materially proglong its usefulness. The materials used for making watch jewels are diamonds, sapphires, rubies and garnets. The diamond is the hardest but is seldom used except for cap jewels. The sapphire is the next hardness and is the most commonly used because of its fine texture. Garnets are softer than than sapphires and rubies. Stem-wind, Lever-Set Movements
Mandatory for all railroad watches after roughly 1908, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (most hunter cases have levers accessible without removing the crystal or bezel), which was generally found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. 3/4 Plate Layout
The 3/4 plate and the balance cock are flush and about 1/4 of a full plate is cut out to allow for the balance, thus the 3/4 plate.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.