Back to the main page Back to category Antique
watch details
Civil War William Ellery Waltham Hunter Case Keywind/Keyset Pocket Watch
Estimated price for orientation: 1 525 $
Category: Antique
Class:
Description Movement: Mechanical: Hand-winding Features: 18 Size Case, Subsidiary Seconds Dial, Spade Hands, Keywind/Keyset Movement, Includes Key, 12-Hour Dial, Roman Numerals, Full Plate Movement Year of Manufacture: 1860-1869 Escapement Type: Lever Brand: Waltham Serial Number: 46,545 Material: Albata Metal Model: William Ellery Closure: Full Hunter
Civil War William Ellery Waltham Hunter Case Keywind/Keyset Pocket Watch with Key
U.S.; Waltham; Man’s; Serial# 46,545; CA1862
CASE: The Albata metal 18-size (50-55MM) No. 42 plain hunter case features a crest and is marked Albata metal.
DIAL: This white porcelain dial displays Roman numerals and has spade hands.
MOVT: This 7-jewel key-set No. 46,545 movement with lever escapement is gilt with a full plate layout and is signed.
C 3 (The case is in very good condition)
D 3-43 (The dial is in very good condition, hairline)
M 3-6 (The movement is in very good condition, patinated)
R 9 (Rarity on a scale of #1 being very common to #10 being extremely rare)
Experts Opinion: Albata metal replaced coin silver during the Civil War where silver was needed! A rare watch carried by a soldier during this horrific battle! AI-178-17 Jewel Count
Jewels are used as bearings to reduce metal-to-metal contacts which produce friction and wear. They improve the performance and accuracy of the watch and materially proglong its usefulness. The materials used for making watch jewels are diamonds, sapphires, rubies and garnets. The diamond is the hardest but is seldom used except for cap jewels. The sapphire is the next hardness and is the most commonly used because of its fine texture. Garnets are softer than than sapphires and rubies. 7 JEWEL WATCHES. 7-Jewel watches have: two hole jewels - one at each end of the balance staff; two cap jewels - one at each end of the balance staff one roller jewel; and two pallet jewels.
Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. 3/4 Plate Layout
The 3/4 plate and the balance cock are flush and about 1/4 of a full plate is cut out to allow for the balance, thus the 3/4 plate.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior. CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.
Description
| Movement: | Mechanical: Hand-winding | Features: | 18 Size Case, Subsidiary Seconds Dial, Spade Hands, Keywind/Keyset Movement, Includes Key, 12-Hour Dial, Roman Numerals, Full Plate Movement |
| Year of Manufacture: | 1860-1869 | Escapement Type: | Lever |
| Brand: | Waltham | Serial Number: | 46,545 |
| Material: | Albata Metal | Model: | William Ellery |
| Closure: | Full Hunter |
U.S.; Waltham; Man’s; Serial# 46,545; CA1862
CASE: The Albata metal 18-size (50-55MM) No. 42 plain hunter case features a crest and is marked Albata metal.
DIAL: This white porcelain dial displays Roman numerals and has spade hands.
MOVT: This 7-jewel key-set No. 46,545 movement with lever escapement is gilt with a full plate layout and is signed.
C 3 (The case is in very good condition)
D 3-43 (The dial is in very good condition, hairline)
M 3-6 (The movement is in very good condition, patinated)
R 9 (Rarity on a scale of #1 being very common to #10 being extremely rare)
Experts Opinion: Albata metal replaced coin silver during the Civil War where silver was needed! A rare watch carried by a soldier during this horrific battle! AI-178-17 Jewel Count
Jewels are used as bearings to reduce metal-to-metal contacts which produce friction and wear. They improve the performance and accuracy of the watch and materially proglong its usefulness. The materials used for making watch jewels are diamonds, sapphires, rubies and garnets. The diamond is the hardest but is seldom used except for cap jewels. The sapphire is the next hardness and is the most commonly used because of its fine texture. Garnets are softer than than sapphires and rubies. 7 JEWEL WATCHES. 7-Jewel watches have: two hole jewels - one at each end of the balance staff; two cap jewels - one at each end of the balance staff one roller jewel; and two pallet jewels.
Key-wind/Key-set Movements
The very first pocket watches up until the third quarter of the 19th century had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the case back and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. This watch includes a reproduction of the correct size key, it is not the original. Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches. 3/4 Plate Layout
The 3/4 plate and the balance cock are flush and about 1/4 of a full plate is cut out to allow for the balance, thus the 3/4 plate.
CUSTOMER SERVICE: Phone 1-800-424-5353 Contact: Rick Gilbert Hours:9 - 5 EST, Monday - Friday Address: eAshland_net Sarasota Arts & Antique Center 640 South Washington Blvd, Suite 200 Sarasota, FL 34236 INTERNATIONAL CUSTOMERS: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior. CODE OF ETHICS...Deal with Honesty Ashland is proud of its reputation as a trusted dealer in antique timepieces. Our customers trust and respect is paramount to the success of our business and to that end we constantly strive to exceed your expectations by adhering to the guidelines listed below: eAshland_net Is committed to its customers satisfaction. Clearly, honestly and accurately represents its products, service, terms and conditions. Delivers its products and services as represented. Communicates in a respectful and courteous manner. Responds to inquiries in a constructive timely way. Maintains appropriate security policies and practices to safeguard customer's information. Offers a free 7 day return policy for watches or jewelry, if ever misdescribed. Does not allow customers personally identifiable information to be transferred or shared with any outside organizations or individuals. Honors requests not to receive further solicitations from eAshland_net. Follows the spirit of the law and all applicable guidelines for ethical business practices.RETURN POLICY: All returns must be accompanied by the original packing slip and received in the exact condition as sent. We maintain photos of all items sold, denoting the condition at the time of purchase and shipping. Any returns based on a third party opinion, i.e. jeweler, watch maker, diamond grader or antique dealer, must have a signed, notarized letter, stating exactly why item is not as described. No exceptions will be made.