Orbita Bergamo 40-Watch Winder
Introducing the BERGAMO 40, ORBITA's new _disappearing watchwinder”. The attractive Italian-made inlaid and veneered cabinet houses a remote controlled motorized lift mechanism that raises or lowers the watchwinder module on command. When in the lowered position, both the watches and the watchwinder mechanism are totally concealed behind a false mirrored panel and the casual observer only sees a beautifully detailed piece of furniture. Two waist-level, ball-bearing mounted storage drawers are also provided for paperwork Access to all internal mechanisms is from the front of the cabinet. Forty (40) Swiss-designed ironless core motors power the 40 winding stations. Unlike other watchwinder manufacturers who utilize a single motor to drive two, three or even four watches together, ORBITA winders are built with each drive station being fitted with its own motor and controlled by its own microprocessor. Consequently, each watch station can be individually programmed for the winding requirements of a specific watch with specific settings for turns per day, winding direction and auto reversing ( if required ). On the Bergamo 40 each station is easily programmed from the front of the cabinet by simply removing a mounting cup and setting the 4 pole DIP switch mounted behind it. Also easily accessible is an on/off control switch for each individual station. Owners of fine automatic watches can be confident that their watches will remain fully wound, ready to wear and properly "exercised" without any concerns about over-winding.
The Italian-made cabinet, with decorative inlays of brass and pear wood, is available in: Madrona Burl veneer (W60034) Mahogany Parquet veneer (W60035) Rosewood veneer (W60036) Standard warranty is for two years. All of the operating components are "plug and play" and in the unlikely event of component failure, each and every component is easily replaced in the field with nothing more than a screwdriver. Orbita offers an extended 3-year warranty on this model